Search All Sencore Products
The DTA 102 is a PC-based solution that offers high speed TS output that is compliant to DVB-SPI standards as defined in DVB BlueBook A010 rev.1 and EN50083-9. It offers support for the use of external signal adapters and external clock input.
Sencore is the preferred distributor of DekTec in North America.
The DTA-105 is a PC-based solution that featured dual ASI output channels on a low-profile PCI card. It provides fully programmable bitrate capabilities from 0-214 mbit/s and dual 16 Mbyte buffers to compensate for PCI and any software latencies.
The DTA-107 is a PC-based solution for a complete DVB-S modulator with L-Band up-converter from 950-2150 MHz that allows for direct RF connection to a satellite receiver.
Sencore is the preferred distributor of DekTec in North America.
The DTA 107-S2 is a PC-based solution for a complete DVB-S2 modulator featuring L-band upconverting from 950 to 2150 MHz that allows for a direct RF connection to a satellite receiver.
Sencore is the preferred distributor of DekTec in North America.
The DTA-111 is an economical solution that offers you a multi-standard modulator with VHF/UHF up-converter that provides support for most QAM, OFDM, and VSB modulation standards
Sencore is the preferred distributor of DekTec in North America.
- Low-cost ATSC/QAM/DVB-T modulator
- Programmable output level
- Bi-directional DVB-ASI port
Sencore is the preferred distributor of DekTec in North America.
The DTA - 115 is a PC based UHF/VHF modulator that supports most QAM, OFDM, and VSB based modulation standards. It is fully agile from 47 to 862 MHz.
Sencore is the preferred distributor of DekTec in North America.
The DTA-116 is a PC-based solution offering you a multi standard modulation with a configurable 36MHz IF that supports most QAM, OFDM, and VSB based modulation standards.
Sencore is the preferred distributor of DekTec in North America.
The DTA-145 is a low-profile, PC-based solution offering two BNC ports, one dedicated ASI/SDI output port, and one selectable input or output port with an operational status LED indicator.
Sencore is the preferred distributor of DekTec in North America.
- Gigabit Ethernet 10/100/1000 Port
- Three bi-directional DVB-ASI Ports
- Transcoding between ASI and TSoIP
Sencore is the preferred distributor of DekTec in North America.
- All Digital multi-standard modulator
- Fully agile from 36 to 1002MHz
- Upgradable to support new standards
Sencore is the preferred distributor of DekTec in North America.
The DTA-2144 is a PC-based solution that provides 4 configurable inputs or outputs. Each port can be independently configured to match your specific requirements. It also offers full support for DVB-ASI and full-frame SDI streams.
Sencore is the preferred distributor of DekTec in North America.
- ASI/SDI input+output or dual output
- Low profile or standard PCI
- Most complete feature set in the market
Sencore is the preferred distributor of DekTec in North America.
- Each HD-SDI port can be input or output
- Analog genlock input
- Random access to audio, video, HANC/VANC
The DTA-2160 offers a PC-based solution for the transmission and reception of transport streams over IP networks, plus provides full transcoding between the ASI and IP ports.
Sencore is the preferred distributor of DekTec in North America.
- Real-time MPEG2 remultiplexing
- PSI and DVB-SI generation and insertion
- Integrated file players
Sencore is the preferred distributor of DekTec in North America.
- Complete DVB-S(2), ISDB-S modulator
- Fully agile from 950 to 2150MHz
- AWGN insertion for simulating fading
- Supports many modulation standards
- 44-MHz IF and digital I/Q outputs
- Bi-directional DVB-ASI port
Advanced network card with two GigE ports for PCIe with DtGrabber+, DtTV and StreamXpress software.
- Fully agile from 32 to 2186MHz
- Extended 72-MHz bandwidth
- 10-MHz/1-pps GPS synchronization input
Sencore is the preferred distributor of DekTec in North America.
- Real-time processing of 3G-SDI signals
- Random access to audio, video, ANC
- Bi-level and tri-level genlock input
Sencore is the preferred distributor of DekTec in North America
- 12G-SDI input and 12G-SDI output port
- HDMI 2.0 port is copy of 12G-SDI output
- Fully supported by Matrix API 2.0
- High-density HD-SDI/ASI connectivity
- PCIe gen3 x 16 for ample bandwidth
- Optimized for DekTec Matrix API
- SDI or HDMI in, low-latency ASI out
- Proven Magnum encoding technology
- Audio: AC3 or AAC (up to 2x5.1), MP1 LII
- Supports HD-SDI, SD-SDI and ASI
- Relay for creating failsafe applications
- API to access video, audio and ANC data