DMG 2100 Modular IP Streamer / Descrambler / Scrambler



Overview

The DMG 2100 IP Streamer/Descrambler/Scrambler is a 1RU, carrier class solution for professional operators. Built on a modular platform hosting a wide selection of I/O and processing modules, the DMG 1000 enables solutions tailored to specific customer applications.

The DMG 2100 can receive transport streams from a variety of input sources including ASI, IP, DVB-S/S2, DVB-T, DVB-C, descramble and re-scramble selected services, before streaming via IP or ASI. For monitoring of services, the DMG 2100 can be equipped with decoder cards. The DMG 2100 supports full analysis of PSI/SI and regenerates all tables as required.

Compared to traditional multiplexing solutions, the DMG 2100 provides a higher density, lower cost and better reliability due to its integrated architecture. The DMG 2100 provides the operator with a web-based Management Interface, which enables remote configuration of all modules, monitoring of their performance, and presentation of service related information. Should a problem be encountered, operators are able to swiftly determine the cause, and faults are easily rectified as all modules can be replaced.


Features

The DMG 2100:

ü GB IP (electrical or optical), ASI, DVB-S/S2, DVB-T and DVB-C inputs

ü Any combination of inputs in the same chassis
    Maximum:
        45 ASI
        28 DVB-S/S2, DVB-T, DVB-C

ü GB IP (electrical or optical) and ASI output. Supports multiple of output modules

ü Multiplexing

ü PSI/SI regeneration

ü Up to 14 DVB common interface slots for DVB descrambling

ü Support for AES SW descrambling

ü Support DVB and AES scrambling, simulcrypt interface based

ü Intuitive web-based user control

ü SNMP Alarm MIB

ü SOAP/XML Interface


Specifications

DMG 2100 Chassis (1RU)
  
• Modular configuration with up to 19+1 board positions
• WEB based configuration, SNMP Alarms, SOAP/XML interface
• Forced air-cooling
• Hot-swappable modules in back
• Optional IP IO and descramblers
 
Switch Module
• Gbit/s routing between modules in a chassis
• Integrated from the front
  
Environmental Specifications
ConditionsOperational Temperature:0° to +40°C
 Operational Humidity:0% to 95% (non-condensing)
 Storage Temperature:-20°C to +70°C
 Storage Humidity:5% to 95% (non-condensing)
PowerPower:Input Voltage 110V/240V, 47-63 Hz
 Power Supply Rating:200W
 Fuse:T250V 4A
 Number of Power Supplies:1
FansCooling:Integrated Fans (airflow right to left side)
 Number of Fans:6
PhysicalDimensions:19" x 1RU
 Mounting Options:Broadcast Style- Cable in back and front
COMPLETE PRODUCT SPECIFICATIONS ARE AVAILABLE IN DOWNLOADABLE PRODUCT BROCHURE

Options


Downloads

Documents


Accessories