VP3340 HD Video Player
- Multiple HDTV outputs including (up to 3 outputs):
- YPbPr/RGB output (Selectable)
- Composite NTSC/Pal Output (Simultaneously with YPbPr)
- Optional DVI output
Overview
The Sencore VP3340 provides you with a reliable high definition signal source that can be used for a variety of applications that could include new product design and testing and product troubleshooting. The VP3340 also provides you with a portable HD signal that can be used for product demonstrations, either in the retail marketplace or at industry trade shows.
Features
- Multiple HDTV outputs including (up to 3 outputs):
- YPbPr/RGB output (Selectable)
- Composite NTSC/Pal Output (Simultaneously with YPbPr)
- Optional DVI output
- Provides you with the ability to down-convert and up-convert video
- Supports 1080I, 720P, 480P and 480I formats
- Allows you to decode MPEG-2 transport stream with video at MP@HL
- High video quality with support of video at bitrate up to 60MBits/s
- Provides an analog audio (2 CH.) and digital AC-3 outputLarge storage capacity for long stream playout capabilities
- Gives you full capability to load your own program material through either the DVD drive Ethernet connection.
- Optional MPEG-2 recording path (LVDS input)
Specifications
| Outputs | |
| # of Decoded Output(s): | 1 std. (+2 optional=3 total) |
| Video Supported: | HD (1080I, 720P), |
| SD (480P, 480I, NTSC/PAL)- | |
| Simultaneous (YPbPr/NTSC/PAL), | |
| selectable | |
| # of HD Video Output(s): | 1 std. (per decoder card) |
| # of SD Video Output(s): | 1 std. (per decoder card) |
| Audio Supported: | Digital, analog - simultaneous |
| # of Digital Audio: | 1 std. (per decoder card) |
| # of Analog Audio: | 1 std. (per decoder card) |
| # of DVI outputs: | Optional 1 per decoder card* |
| (only 2 DVI can be fitted) | |
| Data Throughput | |
| Total Troughput: | 90Mbps between cards |
| Max. per individual card: | 60Mbps |
| Max. Decoder Capability: | 50Mbps (video + audio) |
| HD Analog Video Out: | |
| Standard: | MPEG-2 Compatible MP @ Hl |
| Output Bit Rate: | 1.5 to 60 Mbps |
| Output Format: | 1080I / 720P / 480P / 480I / native / selectable |
| Frame Rate: | 30 or 29.97 or 25 or native |
| Output Type: | Component (YPbPr) or RGBHV |
| Amplitude: | Y= 0.7Vpp video, 0.3Vpp, 0.3Vpp sync |
| PbPr = 0.7Vpp | |
| RGB= 0.7Vpp, 0.3Vpp sync | |
| All Levels +/-10% | |
| Sync: | Tri-level on Video Signals |
| separate H and V (TTL) | |
| Component sync on PbPr | |
| Selectable RGB sync on green | |
| Connector: | High Density (HD) mini 15 pin D-sub |
| (VGA connector) | |
| Impedance: | 75 ohms |
| Optional Transport Stream Input - Record | |
| # of TS Inputs: | 1 |
| Standard: | DVB SPI (LVDS) |
| Data Bit Rate: | 55 Mbps Max. |
| Connector: | 25 pin D-sub |
| SD Analog Video Out | |
| Output Types: | NTSC Composite and S-Video |
| Composite Standard: | ANSI/SMPT 170M |
| Field Rate: | 29.97Hz |
| Amplitude: | 0.7Vpp video (100 IRE) |
| Connector: | Composite= RCA, S-Video |
| Impedance: | 75 ohms |
| Digital Audio Out | |
| Digital Output Type: | SPDIF PCM (Ch0/1), digital standard |
| Precision: | 18-bit stereo Dolby Digital, 18-bit PCM |
| Sample Rates Support: | 32, 44.1, 48kHz (Dolby Digital & MPEG) |
| Digital Level: | 1Vp-p, +/-20% (75 ohms) |
| Digital Connector: | RCA |
| Digital Impedance: | 75 ohms |
| Analog Audio Out | |
| Analog Output Type: | L/R Stereo, Dolby Surround |
| Analog Level: | 1Vp-p, +/-20% (1KHz, 600 ohms) |
| Analog Connector: | Mini 3.5mm stereo |
| Analog Impedance: | 600 ohms |
| Frequency Response: | 20Hz to 2KHz < +/-2dB |
| Storage | |
| Device: | Hard Drives - 2 striped |
| Size/Capacity: | 80G x 2 (subject to change) |
| Over 17 Hours @ 20 Mb/s | |
