Sencore RFXpert Software
- True demodulated digital readings for MER, Pre-BER, Post BER, and EVM
- No calculated readings which can leave you wondering about the accuracy of each measurement
Overview
The RFXpert RF Measurement and Analysis software provides snapshot of your RF signal quality, including; RF level, MER, Pre-BER and Post BER for quick troubleshooting and RF analysis.
An easy-to-read, spectral display with a choice of single channel, adjacent channel, or full spectral display for testing channel interference or a dropped channel. Plus, RFXpert provides you with both constellation and eye diagram displays, and the ability to turn off/on 8-VSB tap equalization to see the uncorrected signal being received.
Features
- True demodulated digital readings for MER, Pre-BER, Post BER, and EVM
- No calculated readings which can leave you wondering about the accuracy of each measurement.
- A proof-positive method of signal documentation or drop-point comparisons with programmable, user-defined logging and auto-inspection capabilities. Simply set the parameters you want to test the signal against, and run "Auto Inspect". You get a pass/fail report that can be store for future reference or documentation.
Specifications
8-VSB and QAM-B | |
RF Input: | Tune to VHF/UHF channels 2-69: Cable Channels; FCC, IRC, HRC (50 -860 MHz) RF Input - 75 Ohms RF Level Input -40 to +50 dBmV |
| RF Tests Levels: | Range -40 to +50 dBmV Resolution: 0.1 dB Accuracy: +/- 1 dB, +/-0.5 dB (typ.) |
| MER: | Range 15 to 32 dB (measured from constellation) |
| EVM: | Range 2.3 to 16.5 RMS |
| BER Tests: | PRE and POST FEC, SER (Severe Errored), Error Seconds |
| Modulation Displays: | Constellation Diagram Eye Diagram |
| Echo Profile: | Delay Range: -2.3 to +40 uS Echo Level: 0 to -30 dBc |
| General | |
| Connectors: | Input- F-Connector/USB-2 to PC input |
| Power Requirements: | 5V @ 500 mA from USB port |
| Size: | 7.1" x 4.2" x 1.4" |
| Weight: | < 1lbs. |
