DMG 3100 Professional Multiplexer
- GB IP (electrical or optical), ASI, DVB-S/S2, DVB-T and DVB-C inputs
- Any combination of inputs in the same chassis
- GB IP (electrical or optical) and ASI output. Supports multiple of output modules
- Multiplexing
- PSI/SI regeneration
Overview
The DMG 3100 multiplexer is a 1RU, carrier class solution for professional operators. Built around a modular platform hosting a wide selection of I/O and processing modules, the DMG 3100 enables solutions tailored to specific customer applications.
The DMG 3100 can receive transport streams from a variety of input sources including ASI, IP, DVB-S/S2, DVB-T, DVB-C, descramble and re-scramble selected services, before multiplexing them into MPTS. The MPTS can be streamed out on IP or ASI. Multiple MPTS can be streamed out on the same IP output interface while the ASI output module supports 4 different MPTS outputs. For monitoring of services, the DMG 3x00 can be equipped with decoder cards. The DMG 3100 supports full analysis of PSI/SI (PSIP in later release) and regenerates all tables as required.
Compared to traditional multiplexing solutions, the DMG 3100 provides a higher density, lower cost and better reliability due to its integrated architecture. The DMG 3100 provides the operator with a web-based Management Interface, which enables remote configuration of all modules, monitoring of their performance, and presentation of service related information. Should a problem be encountered, operators are able to swiftly determine the cause, and faults are easily rectified as all modules can be replaced.
Features
The DMG 3100:
ü GB IP (electrical or optical), ASI, DVB-S/S2, DVB-T and DVB-C inputs
ü Any combination of inputs in the same chassis
Maximum:
45 ASI
28 DVB-S/S2, DVB-T, DVB-C
ü GB IP (electrical or optical) and ASI output. Supports multiple of output modules
ü Multiplexing
ü PSI/SI regeneration
ü Up to 14 DVB common interface slots for DVB descrambling
ü Support for AES SW descrambling
ü Support DVB and AES scrambling, simulcrypt interface based
ü Intuitive web-based user control
ü SNMP Alarm MIB
ü SOAP/XML Interface
Specifications
DMG 3100 Chassis (1RU) | ||
| • Modular configuration with up to 19+1 board positions | ||
| • WEB based configuration, SNMP Alarms, SOAP/XML interface | ||
| • Forced air-cooling | ||
| • Hot-swappable modules in back | ||
| • Optional IP IO and descramblers | ||
| Switch Module | ||
| • Gbit/s routing between modules in a chassis | ||
| • Integrated from the front | ||
| Environmental Specifications | ||
| Conditions | Operational Temperature: | 0° to +40°C |
| Operational Humidity: | 0% to 95% (non-condensing) | |
| Storage Temperature: | -20°C to +70°C | |
| Storage Humidity: | 5% to 95% (non-condensing) | |
| Power | Power: | Input Voltage 110V/240V, 47-63 Hz |
| Power Supply Rating: | 200W | |
| Fuse: | T250V 4A | |
| Number of Power Supplies: | 1 | |
| Fans | Cooling: | Integrated Fans (airflow right to left side) |
| Number of Fans: | 6 | |
| Physical | Dimensions: | 19" x 1RU |
| Mounting Options: | Broadcast Style- Cable in back and front | |
COMPLETE PRODUCT SPECIFICATIONS ARE AVAILABLE IN DOWNLOADABLE PRODUCT BROCHURE | ||
