Click image to view larger
DekTec ASI/SDI Input and Output USB Probe
- Portable Real-time Monitoring of DVB-ASI and SDI- Portable Streaming of DVB-ASI and SDI
- Essential Tool for Every Digital-TV Engineer
- No AC Power Adapter Required
Sencore is the preferred distributor of DekTec in North America.
- Convenient, compact USB adapter that can be used to capture and generate MPEG2 transport streams (DVB-ASI) and uncompressed serial digital video (SDI)
- USB powered - no power supply required
- Independent operation of input and output:
- Full-duplex: maximum combinedbit-rate of 160 MBps
- Half-duplex: Full DVB-ASI andSDI bit-rate range
- 16Mbytes local hardware buffer for sustained real-time streaming
- General-purpose USB adapter for capturing, generating and monitoring of ASI and SDI streams
- On-site recording and analysis
- Portable demo set
KEY ATTRIBUTES
Connector: 75Ω BNC (2x*)
ASI
Physical layer: EN50083-9
Bit Rate Range: 0 to 160 Mbit/s**
Packet Size in Bytes: 188 or 204***
SDI
Physical Layer: SMPTE 259M
Bit Rate: 270 Mbit/s****
#Bits: 8 or 10 bit
Dimensions in mm (LxWxH) 87 x 104 x 30
* 1x Input and 1x Output
** Maximum total bit rate (Input+Output) in full-duplex mode. In halfduplex mode the full ASI/SDI range is supported
*** Arbitrary packet size in raw mode
**** Input or Output. Full-duplex SDI is not supported
MINIMUM REQUIREMENTS
USB Port: USB-2*
Processor / RAM / Disk: Please refer to documentation of DtGrabber+, StreamXpress™, DtTV, and StreamXpert™
* USB-1 ports provide insufficient bandwidth and are not supported
ORDERING INFORMATION
DTU-245-SDP: USB-2 ASI/SDI Input+Output Adapter with DtGrabber+, DtTV and StreamXpress Software
DTU-245-SXP: DTU-245-SDP with StreamXpert TS Analyzer Software