Click image to view larger

DekTec DVB-SPI/LVDS Input Card

DTA-122
  • 0 to 108 Mbit/s
  • 8MBytes buffer
  • Support for external signal adapters

Sencore is the preferred distributor of DekTec in North America.

  • High speed transport stream input, compliant to DVB-SPI (synchronous parallel interface) as defined in DVB document A010 rev 1 and EN50083
  • Special support for external signal adapters from e.g. ECL or TTL
  • Input bit rate 0 to 108 Mbit/s
  • LED indicator shows synchronization status
  • 8Mbytes on board buffer
  • Optional FEC stripping
  • Support for 188 byte and 204 byte packets, or arbitrary packet size in raw mode
  • On-board PCI Bus master for off loading host processor
  • DMA burst mode transfers for optimal usage of PCI Bus
  • PCI rev 2.2, 32 bit, 33 MHz
  • Comes with free:
    • Windows 2000/XP/2003 & Linux device driver and software development kit for developing custom applications
    • Example source code for TS recorder
    • DtGrabber: Windows recorder program
  • General purpose adapter in PC based applications for the reception of an MPEG2 transport stream on DVB-SPI
  • DVB-SPI transport stream recording
  • With DTC-320 StreamXpert software: Versatile MPEG2 transport stream analysis and monitoring tool
  • With DTC-330 DtTV software: Decoding of one television service from a transport stream, or decoding of multiple services for mosaic creation

KEY ATTRIBUTES
Physical layer: DVB-SPI (LVDS)
DVB-SPI connector: 25-pin sub-D
DVB-SPI clock: 0 to 13.5 MHz
Input bit rate: 0 to 108 Mbit/s
Packet size in bytes: 188 or 204*
Target adapter power: 5 V, 2 A

RELATED PRODUCTS
DTA-102: DVB-SPI Output Adapter for PCI Bus
DTC-320:StreamXpert TS Analyzer Software
DTC-330:DtTV TS Television SoftwareL

ORDERING INFORMATION
DTA-122-SP DVB-SPI: Input adapter for PCI bus with DtTV and DtGrabber+.
DTA-122-SX: DTA-122-DP with StreamXpert.

5.0 to 8.0MHz
Datasheet