Click image to view larger

DekTec DVB-S/S2 to IP Converter

DTE-3137
  • Compact professional satellite receiver
  • Full TS output on IP and DVB-ASI
  • LNG power insertior

Sencore is the preferred distributor of DekTec in North America.

  • Standalone DVB-S2 receiver supporting QPSK, 8PSK, 16PSK and 32PSK
  • DVB-S2 demodulation compliant to EN302-307 and EN301-210, as well as legacy DVB-S support
  • Web and SNMP interface for setting parameters and observing status
  • Unit can be powered via the Ethernet cable (Power over Ethernet) or through a DC power supply jack
  • LNB power insertion
  • Full support of SMPTE 2022-1/2, with 2D FEC encoder for robust transport over IP
  • LCD status display shows device identifier, mode, carrier frequency, level, SNR, BER and IP/MAC address
  • Install up to 12 modules in 3U 19” rack space using DekTec rack-mountable rail
  • SMATV: Redistribution of satellite TV
  • General-purpose receiver for obtaining the full transport stream from a DVB-S2 signal

KEY ATTRIBUTES
RF Input
Connector: 75Ω F Female
Return loss: >10dB
Tuning range: 950 to 22150MHz
Sensitivity: -30 to -60dBm
Baud rate: 2 to 40MBd
LNB
Supply: 13V/18V 400mA
22kHz tone: on/off
TS Output / ASI Port
Connector: 75Ω BNC
DVB-ASI: EN50083-92
GigE Port
Connector: RJ-45
Physical layer: IEEE 802.3at
Transport
TP per IP: 1 to 7 UDP/RTP
FEC: SMPTE 2022-1
Device Power
Connector: 2.1 mm DC plug
24 V supply: 22 to 30V; 17W

STANDARDS
EN301 210: DVB-S
EN 302 307 DVB-S2: QPSK, 8/16/32APSK CCM only

RELATED PRODUCTS
IP-address assignment: DHCP or static
Multicast support: IGMP v2
Device management: Browser based
Network management: SNMP v2c
Discovery: WS-Discovery

ORDERING INFORMATION
DTE-3137: Networked DVB-S(2) Receiver

 

Datasheet