Click image to view larger
DekTec GigE/ASI Input and Output Card
The DTA-160 provides for an economical PC-based solution for transmission and reception of transport streams over IP networks.
Sencore is the preferred distributor of DekTec in North America.
- Transmission and reception of transport streams over IP networks, with transcoding between ASI and IP ports
- IP encapsulation in accordance with the SMPTE 2022-1 and 2022-2
- Zero jitter play out of multiple IP streams
- ASM and SSM multicast support
- Generation of two dimensional FEC for outgoing IP streams with programmable dimensions D and L
- Block aligned FEC linearization
- Reordering and error correction of IP streams with programmable latency
- Time stamping of incoming IP packets to enable IP jitter analysis
- Uniform software access to ASI and IP ports with DTAPI
- PCI rev 2.2, 32 bit, 33 or 66 MHz bus
- DVB ID 5821
- Contribution, primary distribution over IP
- Multi-purpose ASI/IP Stream Station
- Jitter measurements of IP streams
- Tunneling ASI streams over an IP network
- General purpose ASI and TS-over-IP inputs and outputs for OEM applications
KEY ATTRIBUTES
GigE Port
Physical layer: IEEE 802.3ab
Data rate: 10/100/1000
Connector: RJ-45
Maximum TS rate: 600 Mbit/s
Transport streams: Unlimited
ASI Ports
Physical layer: DVB-ASI (Coax)
Connector: 75Ω BNC (3x)
Rx or Tx bit rate: 0 to 214 Mbit/s
Resolution: <1 bit/s
Transport packets per IP packet
1,2,3,4,5,6 or 7
Protocol
UDP or RTP
Transcoding rate ASI ↔ IP
0 to 200 Mbit/s
PC Support
Min Config: P4@2GHz, 1GB RAM
OS: Windows-2000 / XP / 2003
Drivers: 32 and 64 bit core driver / NDIS network driver
ORDERING INFORMATION
DTA-160-SDP: DTA-160 adapter bundled with: DtTV TS television DtJitter IP jitter analysis DtGrabber+ advanced recording StreamXpress versatile player
DTA-160-SXP: All of DTA-160-SDP, plus: StreamXpert TS analyzer