Click image to view larger
Dual Port HD-SDI Adapter with Genlock
DTA-2152
- Supports DVB-ASI and SD/HD SDI
- Low profile PCI Express x4
- Dedicated genlock input port
- Two bidirectional ports configurable for receiving or transmitting SD/HD SDI or DVB-ASI
- One dedicated genlock port that can be used to connect an SD of HD bi-level or tri-level analog sync
- SDI output ports can be genlocked to an SDI input port or to the analog genlock port
- 10-bit SD SDI, full stream @ 270 Mbit/s
- 10-bit HD SDI, full stream @1485 Mbit/s
- Complete random access to hardware buffer. Buffer size up to 20 frames in HD-SDI or 100 frames in SD-SDI mode
- SDI video data can be read or written in 10-bit (streaming/recording applications) or 16-bit format (for direct rendering)
- The HD-SDI input-to-output delay is configurable from 2 to 15 frames (up to 0.5s). The SD-SDI input-to-output delay is configurable from 2 to 90 frames (up to 3s)
- Support SDI matrix mode for HD logo generation/keying applications
- Low profile and standard PCI bracket available
- PCI Express x4
- Kill and fill generators
- Genlocked processing of HD-SDI signals
KEY ATTRIBUTES
ASI/SDI connector: 75-Ω BNC (2x)
Genlock connector: BNC
Input return loss: 15dB (SD/HD)
Hardware buffering: 128MB/channell
ASI
Physical layer: DVB-ASI (coax) EN50083-9
Rx or Tx bitrate: 0 to 214 Mbit/s
Resolution: <1bit/s
SDI
Physical Layer: SMPTE 259M (SD) / SMPTE 292M (HD)
Bitrate: 270 Mbit/s (SD) / 1.485 Gbit/s (HD)
#Bits: 8 or 10 bit
*Limited only by cumulative TS rate and PC resources
RELATED PRODUCTS
DTA-2144: Quad-port ASI/SD-SDI adapter for PCIe
DTA-2145: Dual-port ASI/SD-SDI adapter for PCIe with fail-over relays
DTC-335: SdEye real-time SDI waveform monitor
ORDERING INFORMATION
DTA-2152-SDP: Dual-port HD-SDI adapter with DtGrabber+, DtTV and StreamXpress
DTA-2152-SXP: DTA-2152-SDP with StreamXpert