Click image to view larger

Modular Receiver

MRD 2600

The MRD 2600 receiver shares the professional-grade front-end collection from Sencore’s newest decoder designs, but removes the baseband video and audio components. This makes it a cost-effective solution for single-transponder, multi-service descrambling or single channel digital turnaround applications.

With available satellite, terrestrial (8VSB, QAM-B, DVB-T/T2/C/C2/ISDB-T), ASI, and IP input modules, in conjunction with dual- CAM DVB-CI and BISS descrambling, the MRD 2600 is ideally suited for transport stream input/ output. The product is a perfect to feed internal IP distribution or front transcode infrastructure which is missing critical RF interfaces, especially where density is not a key requirement.

The MRD 2600 provides a wide range of control options, including full configuration and status through the front panel and a clean, easy-to-use web GUI. It also features a full SNMP interface, including configurable traps on alarms for easy integration into an control system, and as with all Sencore products, Sencore’s professional support team is just a phone call away in the unlikely event that questions should arise.

Built-in ASI I/O for maximum value and flexibility

Available IP, and RF satellite I/O modules:

  • 8VSB/QAM-B receiver designed for A74
  • DVB-T/T2/C/C2/ISDB-T receiver
  • TurboPSK Interface with Full Mode Support
  • IP Interface with Redundant Receive Paths
  • Dual, Mirrored TS over IP Transmission

Flexible Descrambling Support

  • Two DVB-CI Interfaces Supporting Up to 100Mbps
  • Flexible per-PID/Service Configuration
  • Built-in BISS Mode 1, Mode E, and Multi-key
  • Up to 12 Independant BISS Keys Supported

Easy-to-use web interface

Full control, status, and alarm monitoring via SNMP

Multi-service DVB-CI Decryption
Downlink a DVB-S2 transponder, descramble with up to two professional DVB-CI CAMs, and output an IP MPTS to downstream transcoders or decoders.

8VSB Reception and Turnaround
Receive local stations and output for backhaul as ASI and IP. 8VSB input interface designed for strenuous A74 reception conditions.

Satellite Reception and BISS Descrambling
Simple solution for BISS, BISS-E, or Multi-BISS decryption. Transmit transport steam in the clear via ASI or IP for additional processing.

BASE UNIT FEATURES MRD 26000
ASI Input: 1x 75Ω BNC
ASI Output: 1x 75Ω BNC
Supported Bitrate: 250 Kbps to 200 Mbps
BISS Descrambling License MRD 26921
Supported Modes: Mode 1, Mode E, Injected ID
Multi-BISS Support: Up to 12 Separate Keys
DVB-CI Multi-Service MRD 26991
With DVB-CI Module: Enables Multi-service Descrambling
PID/Service Filtering License MRD 26928
Filtering: 10 Independent TS (MPTS or SPTS) created; output via IP or ASI
Table Regeneration (DVB Mode): PAT regeneration
Table Pass-through (DVB Mode): PMT, CAT, NIT pass-through Table
Regeneration (DVB Mode): PAT, SDT
Table Pass-through (DVB Mode): PMT, CAT, NIT, EIT, RST, TDT, TOT

DVB-CI DESCRAMBLING MODULE MRD 26421
Physical Interface: Adds two DVB-CI CAM Slots
Without Multi-Service License: Descrambles Decoded Service Only
With Multi-Service License: Number of Services limited by CAM

IP INPUT/OUTPUT MODULE MRD 26127
Physical Interface: 2x RJ45, 10/100/1000 Auto-Negotiate
Input Format:
UDP or RTP
Constant Bitrate or Null-Stripped
RTP Header Extensions Supported
SMPTE 2022/CoP3 FEC Supported
Output Format: UDP
MPE De-encapsulation:
Up to 2 PIDs
Up to 60Mbps per MPE PID
IP Encapsulation: 1 to 7 TS Packets per IP Packet
Addressing: Unicast or Multicast
IGMP compatibility: Version 1, 2 & 3
Per TS Bitrate: 250 Kbps to 200 Mbps
MPEG/IP FEC Output License MRD 26925
Additional Output Formats: RTP and Header Extensions
SMPTE 2022/CoP3 FEC Supported

DVB-S/S2 INPUT MODULE MRD 26116
Physical Interface: 4x 75Ω F-Type
Frequency Range: 950-2150 MHz
Symbol Rates: 1-60 MSps
DVB-S Modulation Modes: QPSK (All FEC Rates)
DVB-S2 Modulation Modes:
QPSK/8PSK (All FEC Rates)
16/32APSK with License
LNB Power: Off/13/14/18/19VDC @ 450mA
Control Tone Support: 22 kHz On/Off
DVB-S2 Advanced Feature License MRD 26916
Additional Modulation Modes:
16ASPK/32APSK (All FEC Rates)
VCM Demodulation Support
Multistream Support (Single ISI)

8VSB/QAM-B INPUT MODULE MRD 26101
Physical Interface: 1x 75Ω F-Type
Frequency Range: 50-1000 MHz
Sensitivity: -34 to +40 dBmV (A74 Compliant)
8VSB Standard: ATSC A/53E
8VSB Channel Plans: Broadcast
QAM Standard: ITU Annex B/SCTE DVS-031
QAM Channel Plans: FCC, IRC, HRC
QAM Constellations: QAM64, QAM256

BROADCOM TURBOPSK INPUT MODULE MRD 26111
Physical Interface: 1x 75Ω F-Type
Frequency Range: 950-2150 MHz
Symbol Rates: 1-30 MSps
DVB-S Modulation Modes: QPSK (All FEC Rates)
TurboPSK Modulation Modes: QPSK /8PSK (All FEC Rates)

DVB-T/T2/C/C2/ISDB-T INPUT MODULE MRD 26115
Physical Interface: 1x 75Ω F-Type
Frequency Range: 42-1002 MHz
Bandwidth: 1.7MHz, 5 MHz, 6MHz, 7MHz, 8MHz
Constellations:
DVB-T: QPSK, QAM16, QAM64 (All FEC Rates)
DVB-T2: QPSK, QAM16, QAM64, QAM256 (All FEC Rates)
DVB-C: QAM16, QAM32, QAM64, QAM128, QAM256 (All FEC Rates)
DVB-C2: QAM16, QAM64, QAM256, QAM1024, QAM4096 (All FEC Rates)
ISDB-T: QPSK, QAM16, QAM64 (All FEC Rates)

MANAGEMENT
Connector: RJ-45 10/100 - Auto Negotiating
Protocols: HTTP and SNMP
User Interfaces:
Full control via web GUI
Full control via front panel
Automation Interfaces:
Full status and control via SNMP
Configurable SNMP traps
Web services API available
Syslog message logging
Firmware Updates: Via Web GUI

DIMENSIONS/POWER
Height: 1 RU, 1.72” (44 mm)
Width: 1 RU, 17.2” (437 mm)
Depth: 14.6” (370 mm)
Power:
100-240 VAC 50/60 Hz
36-72 VDC

ENVIRONMENTAL CONDITIONS
Operating Temp: 0° to 45°C
Storage Temp: -40°C to 65°C
Relative Operating Humidity: <95% (non-condensing)