SENCORE PRODUCTS

Home > Products > DVB-S/S2 Satellite Modulator SMD 989 Send to a Friend Printable Version

DVB-S/S2 Satellite Modulator SMD 989

The SENCORE SMD 989 DVB-S/S2 platform is capable of single or multi-stream modulation of MPEG Transport Streams. With an optional L-Band upconverter, the SMD 989 can provide an IF or L-band output. This eliminates the need for multiple pieces of equipment.
The chassis has two bays allowing the SMD 989 to house one or two independent modulators. The platform provides state-of-the-art modulation quality while saving rack space and cost.
The support of multistream with Variable Coding and Modulation (VCM) allows each Transport Stream in the single RF carrier to have its own modulation parameters. Multistream reduces overall equipment needed and increases the efficiency of transponder use while guaranteeing the integrity of the content.

DVB-S2 Satellite Modulator SMD 989

KEY FEATURES
APPLICATIONS
SPECIFICATIONS

Chassis supports two independent modules
Configure with one or two DVB-S/S2 modulators,
Ability to modulate 1 to 6 multistream transport streams on a single carrier (no separate products needed to support multistream)
L-band and IF outputs
ASI and IP inputs
Front panel and web GUI for easy configuration
L-band monitoring output

Contribution and Delivery

Uses state-of-the-art technology for cost-saving satellite delivery

News Gathering

Easy-to-use, robust platform is ideal for news gathering applications

VCM Transmission

The SMD 989 can modulate single or multistream DVB-S/S2 transmissions

INPUTS

ASI

Connector:

4x BNC

Impedance:

75Ω

Packet format:

Auto detect 188/204 byte

Syntax:

SPTS or MPTS

TS Bitrate

0.5 Mbps - 160 Mbps

Inputs:

Receives up to 6 TS streams

Connector Type:

(1) RJ 45 10/100/1000

Addressing:

Unicast and Multicast

IP Encapsulations:

1 to 7 TS/IP UDP or RTP

TS Bitrate

0.5 Mbps - 160 Mbps

REFERENCE

External Reference:

10 Mhz Frequency/50Ω BNC

Return Loss:

>15 dB

Input Level:

-3dBm to 7dBm

Internal Reference:

internal reference also present

DVB-S/DSNG

Modulation format & FEC rate:

QPSK, FEC rates 1/2, 2/3, 3/4, 5/6, 7/8

8PSK, FEC rates 2/3, 5/6, 8/9

16QAM, FEC rates 3/4, 7/8

Baud rate range:

0.5 - 45 Mbaud

Roll-off Factor:

0.20, 0.25, 0.30

Spectral Inversion:

on / off

DVB-S2

Signal Format:

CCM / VCM

Modulation format & FEC rate:

QPSK, FEC rates 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10

8-PSK, FEC rates 3/5, 2/3, 3/4, 5/6, 8/9, 9/10

16APSK, FEC rates 2/3, 3/4, 4/5, 5/6, 8/9, 9/10

32APSK, FEC rates 3/4, 4/5, 5/6, 8/9, 9/10

Baud rate range:

0.5 - 45 Mbaud

Roll-off Factor:

0.20, 0.25, 0.30

Number of multi stream support:

1-6 TS

Spectral Inversion:

on / off

FEC Frames:

Normal, Short

OUTPUTS

Frequency:

70 MHz/140 MHz

Level:

-30 dBm to -5 dBm

Connector:

75Ω BNC

Return Loss:

>20 dB

Spurious Signal Level:

-50dBc with -10dBm output

Phase Noise:

-60 dBc/Hz at 100 Hz

-70 dBc/Hz at 1k Hz

-80 dBc/Hz at 10 kHz

-90 dBc/Hz at 100 kHz

-90 dBc/Hz at 1 MHz

L-BAND

Frequency:

950-2150 MHz (adjustable in 1 KHz steps)

Level:

-30 dBm to 5 dBm (adjustable in 0.1dB steps)

Connector:

SMA 50Ω

Return Loss:

>15 dB

Monitoring Output:

-20 dBc @ main frequency

MANAGEMENT

Connector:

RJ-45 10/100 - Auto Negotiate

Protocols:

HTTP and SNMP

User Interface:

HTML Web Client

ALARM INTERFACE

Type:

Electrical dual contact closure alarm contacts

Connector:

9-pin sub-D female

Alarms supported:

User configurable to any alarm(s)

DIMENSION

Height:

1RU, 1.75” (5cm)

Width:

17.4” (44.2 cm)

Depth:

23” (58 cm)

Power:

100-240 AC 50/60 Hz @ 3 Amps

POWER

Operating Voltage:

95-135 VAC / 480-265 VAC

Power:

200 Watts

Frequency:

47-63 Hz

ENVIRONMENTAL CONDITIONS

Operating Temp:

0° to 45°C

Storage Temp:

-40°C to 65°C

Relative Operating Humidity:

<95% (non-condensing)