|
DVB QPSK Modulation Parameters:
• FEC Code Rates: 1/2, 2/3, 3/4, 5/6, 7/8
• FEC Modes: As per ETSI EN 300 421 V1.1.2 DVB
• Symbol Rate: 256 KSps to 30 MSps
• Excess Bandwidth (alpha): 0.1 to 0.5 with 0.01 Resolution
• Spectral Inversion: on/off
Advanced QPSK Modulation Parameters:
• FEC Code Rates: 1/4, 1/2, 3/4
• FEC Modes: Turbo Code
• Symbol Rate 256 KSps to 30 MSps
• Excess Bandwidth (alpha): 0.1 to 0.5 with 0.01 Resolution
16 QAM Modulation Parameters:
• FEC Code Rate: 3/4
• FEC Modes: Turbo Code
• Symbol Rate 256 KSps to 30 MSps
• Excess Bandwidth (alpha): 0.1 to 0.5 with 0.01 Resolution
DSS QPSK Modulation Parameters:
• FEC Code Rates: 1/2, 2/3, 6/7 FEC Mode
• Symbol Rate 256 KSps to 30 MSps
• Excess Bandwidth (alpha): 0.1 to 0.5 with 0.01 Resolution
70 MHz I.F. Output Specifications:
• Frequency: 70MHz, Agile within +20 to -20MHz, 1Hz steps
• Power: 5 to -20 dBm, 0.5 dB steps
Note: the power output will be affected with temperature variations up to 2 dBm.
• Power Accuracty: 1 dB (CW mode and spectral output mode)
• In Band Spurious: 50 dBc
• Out of Band Spurious: 50 dBc
• Phase Noise:
@ 100 Hz, -71 dBc
@ 1 kHz, -81 dBc
@ 10 kHz, -91 dBc
@ 100 kHz, -101 dBc
@ 1 MHz, -111 dBc
• Impedance: 75 W |
Monitored Parameters:
• Fault History
• Input Sync presence
• Output signal presence
• Faults: Temperature, supply voltages and fans
Transport Stream Inputs:
All TS inputs up to 8.5 Mbits/s
• M2P input, DV25
• DVB-SPI input, DB25 with loop through
• DVB-ASI input, BNC with DB25 loop through
• MPEG Bit/Byte clock output for modulator master mode operation
• Packet stuffing and recalculation of PCR for input data rate adjustment >0% and <40% of packets stuffing
• DVB-ASI sync mode for automatic data rate adjustment
External Clock input:
• 10 MHz input TTL on BNC connector
If external clock is present, unit automatically synchronizes to incoming 10 MHz. If clock absent, unit uses internal reference.
General Specifications:
• Line Power: 100-240 Vac, 50-60 Hz
• 2 lines x 18 Characters Vacuum Fluorescent Display
• Dimensions: 19” W x 21” D x 1.75” H (1U rack mount chassis)
• Operating temperature Specs 0-50c
Control Specifications:
• RS232, and 10 Base T Ethernet connections for configuration, monitoring and control
• Relay contact outputs for fault monitoring and automated redundancy switch control
• SNMP protocol supported |
