CP288 - Auto "ColorPro II" Color Analyzer

	Easy-to-use WindowsTM GUI, giving you four options for displaying your measured data; a CIE Chromaticity Diagram, large CIE coordinates, RGB Levels, and the Auto "ColorPro II" control window.		Sync-locked measurements - automatically reads and displays the refresh rate of the display under test.
	Industry standard measurement units and display modes - readings are displayed in Yxy, RGB, and color temperature in degrees Kelvin. Luminance units are selectable between foot-lamberts and cd/m2 (nits).		Programmable reference data - references may be entered and stored by the user, and is limited only by the amount of memory available on the host system.
	Accuracy that only an engineer would require - the CP288 has the specs necessary to do a complete white-balance alignment, so you can be sure you match display manufacturer specifications.		Tracking data is made easy - print your analysis data straight from the measurement screen. The printed form will contain the manufacturer's name, model number, serial number, measured data, and comments.

CP288 Condensed Specifications

Display Modes:
Yxy, Yu'v', XYZ, Delta RGB, correlated color temperature in Kelvins

Luminance Range:
.05 to 150fL; luminance units are selectable on the front panel for either foot lamberts or cd/m² (nits)

Accuracy:
Y: ± 4%, ± 1 digit, xy:± 0.002

Repeatability:
Y: ± 0.3%, ± 1 digit; xy: ± 1%, ± 1 digit

Screen Refresh:
30 to 120 Hz

Measurement Rate:
(vertical field rate)/12

Stored References:
9300 K, D50, D65, D75, and custom for delta RGB measurement modes

[ Sencore Home Page ]