DMG 3000 Professional Multiplexer



Overview

The DMG 3000 multiplexer is a 4RU, carrier class solution for professional operators. Built around a modular platform hosting a wide selection of I/O and processing modules, the DMG 3000 enables solutions tailored to specific customer applications.

The DMG 3000 can receive transport streams from a variety of input sources including ASI, IP, DVB-S/S2, DVB-T, DVB-C, descramble and re-scramble selected services, before multiplexing them into MPTS. The MPTS can be streamed out on IP or ASI. Multiple MPTS can be streamed out on the same IP output interface while the ASI output module supports 4 different MPTS outputs. For monitoring of services, the DMG 3000 can be equipped with decoder cards. The DMG 3000 supports full analysis of PSI/SI (PSIP in later release) and regenerates all tables as required.

Compared to traditional multiplexing solutions, the DMG 3000 provides a higher density, lower cost and better reliability due to its integrated architecture. The DMG 3000 provides the operator with a web-based Management Interface, which enables remote configuration of all modules, monitoring of their performance, and presentation of service related information. Should a problem be encountered, operators are able to swiftly determine the cause, and faults are easily rectified as all modules can be replaced.


Features

The DMG 3000:

ü GB IP (electrical or optical), ASI, DVB-S/S2, DVB-T and DVB-C inputs

ü Any combination of inputs in the same chassis
    Maximum:
        45 ASI
        28 DVB-S/S2, DVB-T, DVB-C

ü GB IP (electrical or optical) and ASI output. Supports multiple of output modules

ü Multiplexing

ü PSI/SI regeneration

ü Up to 14 DVB common interface slots for DVB descrambling

ü Support for AES SW descrambling

ü Support DVB and AES scrambling, simulcrypt interface based

ü Intuitive web-based user control

ü SNMP Alarm MIB

ü SOAP/XML Interface


Specifications

DMG 3000 Chassis (4RU)
  
• Modular configuration with up to 16+2 board positions
• WEB based configuration, SNMP Alarms, SOAP/XML interface
• Forced air-cooling
• Hot-swappable modules
• Dual redundant hot-swappable fans
• 4 individually monitored hot-swappable fans
 
Switch Module
• Gbit/s routing between modules in a chassis
• Integrated from the front
  
Environmental Specifications
ConditionsOperational Temperature:0° to +40°C
 Operational Humidity:0% to 95% (non-condensing)
 Storage Temperature:-20°C to +70°C
 Storage Humidity:5% to 95% (non-condensing)
PowerPower:Input Voltage 110V/240V, 47-63 Hz
 Power Supply Rating:200W
 Fuse:T250V 4A
 Number of Power Supplies:1
FansCooling:Integrated Fans (airflow right to left side)
 Number of Fans:6
PhysicalDimensions:19" x 4RU
 Mounting Options:Broadcast Style- Cable in back and front
COMPLETE PRODUCT SPECIFICATIONS ARE AVAILABLE IN DOWNLOADABLE PRODUCT BROCHURE

Options


Downloads

Documents


Accessories