|
SERIAL MEASUREMENTS
General Serial
Level
MAXIMUM INPUT LIMIT:
6 V(p-p). RESOLUTION: 12 mV. BANDWIDTH: 143 to 270 Mb/sec.
Peak To Peak
Level Measurement
RANGE: 0V to 3V (DC
+ peak). ACCURACY: >500 mV input, ±5%, ±1 count.
<500 mV input ±10%, +1 count.
DC Offset Level
Measurement
RANGE: ±1.5
V (DC + peak). ACCURACY: >500 mV input, ±5%, ±1 count.
<500 mV input ±10%, +1 count.
CM Noise Level
Measurement
RANGE: ±1.5
V (DC + peak). ACCURACY: >500 mV input, ±5%, ±1 count.
<500 mV input ±10%, +1 count.
Jitter Measurement
RANGE: 0 to
1.5 nS. RESOLUTION: 40 pS. ACCURACY: ±4% of the bit
rate period ±1 count.
RECOVERED CLOCK
MEASUREMENTS
Low Frequency
Jitter Measurements
RANGE: 0 to 1.0 nS.
RESOLUTION: 60 pS. BANDWIDTH: 10Hz to 1KHz. ACCURACY
±10%, ±1 count.
EDH
Full EDH Error Detection.
TRS
Detects Listed TRS
Errors Over A Period Of Time. Counts All Errors Within
1 Second. Detects Reserved Code Errors.
Video Range
Errors
Detects All Major
Video Range Errors
Bit Activity
ACTIVITY: Will detect
if there is activity and identity inactive bit.
Ancillary Data
Detects Ancillary
Data And Identifies Type.
Alarms
USER SET-UP: Software
Configurable. TYPES: Front Panel LED (major and minor),
Audible, GPI Open Drain FETs.
RGB Output
CONNECTOR: See GPI.
SIGNAL LEVELS: 700 mV ±10%. REPRODUCTION: 8-bit D/A
Resolution Accuracy.
Serial Loop-Through
RETURN LOSS: >=16dB.
REPRODUCTION: 100% Original Signal.
Parallel Printer
Port
CONNECTOR: Standard
25 pin D-sub. OUTPUT: Industry standard levels and configuration.
Keyboard
TYPE: PS/2 style
(6 pin mini DIN). OUTPUT: Industry standard levels and
configuration.
Generator Logs
Logs all errors as
specified by the user (disk drive or printer).
Serial Ports
TYPE: RS-232C 9 pin
D sub. OUTPUT: Industry standard levels and configuration.
GPI (General
Purpose Interface)
CONNECTOR: 15 pin
mini D-sub. PIN OUTS: See user's reference manual.
Power Supply
INPUT VOLTAGE:
Auto select 105 VAC to 240 VAC. POWER (WATTAGE): 70
W maximum.
Operating Temperature
RANGE: 5° C to
45° C.
|
