As Low As $100 Per Month!

Select an Accessory Click Here To See Accessory List39B296:A - Video Test Cable39G508 - Composite Sync Cable39G348 - Drive Sync Cable39G494 - Dynamic DVM Test LeadHP200 - 50kV High Voltage ProbeTP212 - 10kV Transient Protector ProbePC263 - Protective Cover

HA2500 Universal Horizontal Analyzer Features

	Unique frequency lock and variable horizontal frequency use allows you to quickly service all horizontal circuits no matter the frequency		Exclusive "Horizontal Output Load Test" makes setup and testing a snap - even without applying AC power for more accurate estimates, fewer damaged replacement parts, and faster diagnosis and repair
	Patented "ringer" proves the condition of flybacks and yokes in seconds - even a single shorted turn		Exclusive "Dynamic Tests" help you analyze the horizontal circuit in powered-up conditions to catch even subtle defects in the power supply, noise, and drive signal
	Variable-current limited & protected B+ substitute power supply permits testing of horizontal stages even when the power supply is dead		Portable and field rugged to go on location when bringing the defective product to your bench isn't feasible

HA2500 Condensed Specifications

HORIZONTAL FREQUENCY GENERATOR    FUNCTION: - Squarewave generator for Load Tests and Sub Drive functions.    FREQUENCY RANGE: 15 kHz to 125 kHz

EXTERNAL SYNC INPUT:    INPUT SIGNALS: - Horizontal Sync, Composite Sync, Composite Analog Video (± Polarity)    FREQUENCY RANGE: 15 kHz - 125 kHz    SENSITIVITY: Composite Analog Video > .5 VPP Horiz. or Composite Sync > 2 VPP

HORIZONTAL OUTPUT LOAD TEST B+ POWER SUPPLY     VOLTAGE RANGE: - 0 - 18 VDC ± 0.5 volts.     CURRENT LIMIT: 250 mA ± 10%

HORIZONTAL OUTPUT LOAD TEST SETUP     EXCITATION DRIVE: Squarewave 50% duty cycle ± 2%     B+ VOLTS RANGE: 0 - 19.9 volts     VPP RANGE: autoranged 0 - 400 VPP

HORIZONTAL OUTPUT LOAD TESTS     B+ mA RANGE: 0 - 250 mA     TIME µS RANGE: 0.1 µS - 50 µS     TIME µS TRIGGER LEVEL: 5% ± 1% of pos. pulses with VPP > 10 VPP

RINGER TEST    FUNCTION: Approximate coil "Q" determined by exciting the coil and       counting ringing cycles to a damped level.

DYNAMIC TESTS (Collector or Drain Meter)     VDC RANGE: Autoranged, 0- 400 volts     VPP RANGE: Autoranged, 0 VPP to 1500 VPP     TIME µS RANGE: 0 - 50 µS     TIME µS TRIGGER LEVEL: 5% ± 1% of pulse VPP >20 VPP

DYNAMIC TESTS (Base or Gate Meter)     VPP RANGE: 0 VPP to 50 VPP

DYNAMIC TESTS (Horizontal Driver Test)     FUNCTION: Measures the horizontal driver stage output       current capability by simulating a low impedance base/emitter transistor junction.     BASE mA RANGE: 0 - 2000 mA

DYNAMIC TESTS (Sub Drive)     FUNCTION: Substitute drive optimized to properly drive       the base or gate of any horizontal output transistor.     BASE SUB OUTPUT: Squarewave 50%, -2/+6% duty cycle     GATE SUB OUTPUT: Squarewave, 50% duty cycle ±2%

SUBSTITUTE B+ SUPPLY     VOLTAGE RANGE: 30 volts to 180 volts     POWER OUPUT: 2 amps ± 10% to 40 volts, 80 watts ± 10% over 40 volts     POWER LIMIT RANGE: 3 watt (min.) to 80 watt

GENERAL     FLOATING GROUND ISOLATION:       600 volts (DC + peak AC) from "-" terminal to chassis ground with 500 µA     DIGITAL DISPLAY: Vacuum fluorescent matrix, 40 x 2     AC POWER: 105 to 125 VAC 50/60 Hz. May be factory converted to 220 VAC.     SIZE: 6" X 11.5" X 15.5" (15.2 X 29.1 X 39.3 cm) HWD     WEIGHT: 14 lbs. (6.4 kg.)

All specifications allow for 20 minutes of warm-up and are guaranteed at 15 to 35 degrees C.

[Sencore Home Page]