Sencore designs, builds, and markets electronic test instruments.

	Provides SMPTE 292M uncompressed video output
	Supports SMPTE274, SMPTE296 and SMPTE240 formats
	Support Sony Segmented Frame "Sf" format
	8 or 10 bit video output selection
	Built in video sequence for signal path test
	Built in encoder killer sequence for encoder performance analysis
	Loading new sequences through Ethernet or front panel DVD
	256MB of on board RAM allows sequence up to 40 frames
	Analog monitoring output- RGB or YUV
	Sequence play, still play and step through frame playout mode
	19 inch, 2U rack mountable
	HD signal generator for HD signal path verification
	Evaluation of encoders with innovative built in Sarnoff pattern
	HD still frame generator for low cost HD still generation

Format supported:

1280x720P @ 59.94Hz 1280x720P @ 60Hz

1920x1035I @ 29.97Hz 1920x1035I @ 30Hz

1920x1080I @ 25Hz 1920x1080I @ 29.97Hz

1920x1080I @ 30Hz 1920x1080P @ 23.98Hz

1920x1080P @ 24Hz 1920x1080P @ 25Hz

1920x1080P @ 29.97Hz 1920x1080P @ 30Hz

1920x1080Sf @ 23.98Hz 1920x1080Sf @ 24Hz

1920x1080Sf @ 29.97Hz 1920x1080Sf @ 30Hz

Analog output: YUV or RGB with sync on green.

HD292M output: BNC connector. Complies with SMPTE292M specifications.

Built in stress pattern:
Encoder Stress Pattern (ESP) is uniquely suited to help one judge the performance of DTV encoders. An endless 32-frame sequence designed to excite different and readily apparent failure modes such as: Alias Edging, Amplitude Range, HF Quantization, DC Quantization, Noise Corruption, Motion Estimation, Raster Decimation, Temporal Subsampling, Temporal Quantization, MPEG Bit Rate Effects, Judder & Missing Frames, System Frequency Response, Spatial Frequency Response, V vs. H Resolution Equality.

Program Storage: Over 2500 HD frames

Dimensions: 17"x 3.5"x 20", 16lbs

For more information call: Sencore Inc.
1-800-Sencore (1-800-736-2673) or 1-605-339-0100
3200 Sencore Drive Sioux Falls, SD 57107