|
QPSK Input:
Tuning Range: 950 MHz to 2150 MHz
FEC Code Rates: 1/2, 2/3, 3/4, 5/6, 7/8
Symbol Rate: 1 MSps to 30 MSps
Input level range: -70 to -25 dBm
Tuning resolution: 1 Hz/Auto tuning capable
Connector: F-81 Type, panel mount, 75 ohms
TRANSPORT STREAM
ASI Serial TS Input/Output:
1 ASI Input, 1 ASI Output– 2 BNC’s
Standard: EN50083-9 (V2:3/98) DVB ASI
Data Bit rate: 270 Mbits/s (Max TS 60 Mbits/s
310M Serial TS Input/Output:
1 SMPTE 310M Input, 1 SMPTE 310M Output– 2 BNCs
Standard: SMPTE 310M
Data Bit Rate: 19.392658 Mb/s, synchronous
Parallel (SPI) TS Input/Output:
1 LVDS TS Input, 1 LVDS TS Output – 2 parallel
connectors
Standard: DVB EN50083-9 (V2:3/98) DVB SPI
Data Bit Rate (In/Out): 1.5 – 60 Mb/s
Connector: 25 pin D-sub (2), female
Video Decoder:
Compatibility Standard: MPEG-2 compatible MP@HL
Decoder Bit Rate: 1.5 – 60 Mb/s
Format @ Frame rate: 18 ATSC formats
Scalability: Input/Output format fully selectable
Up/down convention: 1080i, 720p, 480p, 480i
Analog Video Outputs:
Output Type: simultaneous Component (YPbPr)
and RGBHV
Video format: 1080i, 720p, 480p
Output Standard: EIA-770.3
Sync: HD, VD: TTL
Component Sync: Tri-level (Y only)
Output Type: Composite Standard (480i)
Output standard: ANSI/SMPTE 170M- 1994
Connector (480i) Composite = BNC
S-Video = 4-pin DIN
|
DIGITAL VIDEO
SDI Output:
Standard: ITU-BT.601/SMPTE 259M
Data Bit Rate: 270Mbps
Embedded audio: SMPTE272M
Audio sample rate: 48KHz
Optional HD SDI Output:
Standard: SMPTE 292M
Data Bit Rate: 1.485Gbps
Embedded audio: SMPTE 299M
Audio sample rate: 48KHz
Audio Decoders (2) and Outputs:
Analog Audio Out : 2 Ch – Stereo (L,R),
downmix (Lt,Rt), off
Connectors: Unbalanced out 2 BNC at 50 Ohm
Balanced out Terminal block at 50 Ohm
Frequency Response: 20Hz to 20KHz < +/-2dB
Digital Audio Out: AC-3 or PCM-Ch1/2
Standard: AES-3 (IEC 60958-3), AC-3,
MPEG-1, layers 1 and 2,
AES3id (IEC 60958-4)
Closed Caption:
Overlay: DTVCC or NTSC services onto video
DTVCC Overlay Services: Follows FCC 00259
requirements
Standard: NTSC - EIA 608B, EIA708B
Embedded: NTSC into ancillary space and
line 21 of the SDI
NTSC, DTVCC into ancillary
space of HD-SDI
Analog video: NTSC services available on
line 21
General Specifications:
Display Type: VFD (Vacuum Fluorescent
Display)
Display Configuration: 4 lines x 20 characters
Keypad: Mechanical switches
Remote Interface: RS232 over 9 pin D-sub
Power: AC Input, 100V - 240VAC
Power consumption: Normal operating - 50W,
200W max
Operating Temperature: 15 to 35 degrees C
Size: Height = 2U, Width = 19", Depth = 14"
Weight: 15 pounds
|
