SP295
'SoundPro' Audio Analyzer Contractor Version
Firmware Now Available
 |
A
filter version of the Real-Time Analyzer has been added
which performs octave and 1/3 octave band analysis of
voice or music, with fast response to audio changes. |
 |
The
FFT version of the Real-Time Analyzer has been updated
with cumulative averaging and Cinema X Curve weighting. |
 |
Now,
the Real-Time Analyzer, Sound Pressure Level Meter,
Energy-Time Graph, and Reverb Decay Time functions analyze
line level input signals from
external microphone preamps, mixers, audio processors,
or other line level sources, as well as acoustic measurements
through the supplied microphone. |
 |
The
new Sound Study Graph plots from one minute to 24 hours
of average or peak SPL measurement samples, and automatically
stores up to 40 plots to memory. |
 |
The
Energy-Time Graph, Reverb Decay Time and Sound Level
Meter functions now analyze room response with octave
or 1/3 octave band filters. |
 |
The
Sound Level Meter now adds ANSI-standard Impulse, Peak,
and Leq averaging to the standard Fast and Slow averaging. |
 |
The
integrated Audio Signal Generator now provides octave
or 1/3 octave band-limited pink noise output, and an
impedance meter sub-function. |
 |
The
SoundPro Contractor version also adds Signal to Noise
Ratio; Impedance Sweep, Amplitude Response Sweep, and
Sine Wave Sweep; Speech Interference Level, Monitor
Amplifier, Time Code Tool functions, and a Phantom Power
Test. |
 |
And
many more added capabilities, to professionally enhance
your sound work. |

[ Sencore Home Page ] Email webmaster@sencore.com for feedback on our site. Or call 1-800-SENCORE (736-2673)/1-605-339-0100 Copyright © 1997 Sencore, Inc. All rights reserved.
|